INTRODUCCION
Airport fence is a kind of fence specially designed for airports and some safe places. Airport fence vertical part is same to 3d fence. 50 * 100mm mesh and 4 bends provide the panel with high strength rigid. The V-shaped part on the top of the Airport fence is composed of Y post, V panel, RAZOR wire and 4 sets of clips. The Airport fence system is very robust. The entire design ensures the beauty of the airport. And the V-shaped system completely prevents people from climbing over.
CARACTERISTICAS
Medium budget
See-through panel
Anti-rust,Long Service Life
Fast Installation
Customer specs available
High Security
COLORES DISPONIBLES
GALERIA
CONTACTANOS AHORA
The panels have vertical barbs of 30mm on one side and are reversible (barbs at top or at bottom).
The heavy wires guarantee strength and rigidity.
2900mm option can reduce installation & post cost by approx 20%, when compared with a 2.5m wide panel.
If the panel is higher than 2300mm，we will suggest 2300mm wide panel to suit for container size.
Thicker wire can offer stronger rigid
50*200mm / 50*100mm
100mm
-
100mm
Suare post: 60*60mm
Rectangle post: 40*60mm
A Suare Post
B Rectangle Post
S-1: Plastic Clamp
S-2: Plastic Clamp
A: Metal spider clamp
B: Metal Square clamp(2pc)
C: Metal square clamp(1pc)
D: Plastic square clamp
E: Plastic Round clamp
F: Metal Round clamp
S-1: Plastic Clamp
S-2: Plastic Clamp
A: Metal Spider Clips
B: Metal round clamp
C: Metal square clamp
D: Metal square clamp
E: Plastic round clamp connection
F: Plastic round clamp connection
A: Anti-UV plastic cap
B: Metal cap
Anti-UV plastic cap
Metal cap
Electric Galvanized(8-12g/m²) + Polyester Powder Coated (All colors in Ral)
Electric Galvanized(8-12g/m²) + PVC Coated
Hot Dipped galvanized(40-60g/m²) + Polyester Powder Coated (All colors in Ral)
Hot Dipped galvanized(40-60g/m²) + PVC Coated
Hot Dipped Galvanized after welding (505g/m²)
Galfan(200g/m²) + Polyester Powder Coated (All colors in Ral)
Galfan(200g/m²) + PVC Coated
NOTE:
Be manufactured using galvanized steel wire.
Be coated with exclusive Architectural Grade Powder Coat.
This coating is super-durable and environmentally sound. Our powder coating provides the industry’s Highest Weather ability and Gloss Retention in U.V. Exposure.
Up to 3 times longer than competitor’s powder coatings
Pre-Galvanized
Powder Coating
PVC Coating
Hot Dipped Galvanized
A: V ARM
B: BARBED WIRE
C: CONCERTINA RAZOR WIRE
D: V PANEL
The post can be "Y" POST and straight post +V top
V panel can also replaced by "6 lines barbed wire"
Barbed Wire
Concertina Razor Wire
V arm A for Square post
V panel
Que necesitamos preparar
A: panel
B: Y post with rain hat
C: Clips for straight panel(4 clips for 2m high fence, 3 clips if paenl is lower than 1.5m）
D: Clips for V panel(4 clips )
E: V Panel
Concertina Razor Wire
S-1 Plastic Clips
S-2 Plastic Clips
V Panel
Y post
Panel
A: panel
B: Y post with rain hat
C: Clips for straight panel(4 clips for 2m high fence, 3 clips if paenl is lower than 1.5m）
D: Barbed wire
E: Razor wire
Barbed Wire
Concertina Razor Wire
S-1 Plastic Clips
Y post
Panel
Metodo de instalacion
Option A: Y POST+V PANEL
Step 01:
Measure and mark the post location as per the panel width Dig holes for posts. In common, the post is 500mm longer than panel. So 300*300*500mm is ok.
Step 02
Install the post with concrete. Each post must be set perfectly plum in the concrete
Step 03:
Install 1 panel to post with clips.
Step 04:
Install the second post with concrete. Each post must be set perfectly plum in the concrete
Step 05:(Option-A)
Fix the "V Panel" with Plastic M clips
Step 06:(Option-A)
Fix the concertina razor wire
Option B: Y POST+Barbed wire
Step 01
Measure and mark the post location as per the panel width Dig holes for posts. In common, the post is 500mm longer than panel. So 300*300*500mm is ok.
Step 02
Install the post with concrete. Each post must be set perfectly plum in the concrete
Step 03:
Install 1 panel to post with clips.
Step 04:
Install the second post with concrete. Each post must be set perfectly plum in the concrete
Step 05:(Option-B)
Fix the 6 lines tension wire or barbed wire
Step 06:(Option-B)
Fix the concertina razor wire
Diagrama de flujo de produccion
PASO 01
Steel Wire
PASO 02
Cutting
PASO 03
Welding
PASO 04
Bending
PASO 05
Powder Coating
PASO 06
Panel
PAQUETE
Accessories Package
Panel Package
Post Package
REFORENCIA
2011,17000m Airport fence for New Doha International Airport in Qatar.
2012,4279m Airport fence project for Australia..
2013,22000m Airport fence Warri Airport of Nigeria.
2014,4500m Airport fence project for Nigeria.
2015,5541m Airport fence project for Algeria Army.
2017,5000m Airport fence for Turkmenistan.
2019,2430m Airport fence for Nigeria.
EL CLIENTE DICE
ChieFENCE did a fantastic job of Airport fencing in China. It was a difficult job with uneven ground. but ChieFENCE arranged and took care of everything. He finished production in good time, nice service beyond what was necessary and was a pleasure to deal with even before I broke out the coffees and bacon sandwiches!
-JoyWe would be happy to recommend your service to others – many thanks for a job well done! We were impressed by your level of communication from start to finish and found your tradesperson to be both friendly and helpful.
-Friendly and HelpfulI have found ChieFENCE to be prompt, pleasant and professional. They understood what I needed done, service with the requirements, and I am very happy with the end result.
-Prompt Pleasant and ProfessionalChieFENCE are, without a doubt, a first class company to do business with. I have been around the construction business for many years during my lifetime. ChieFENCE and their hard working employees are simply the cream of the crop.
-First Class Company to do Business withJust wanted to say thanks for a great job, the airport fence look fantastic, just what we wanted, perfect. Thanks for your excellent service (and answering all my emails!) Thanks to Gavin and the Sales – they were very professional, tidy, knowledgable and obviously knew what they were doing. We would have no hesitation in recommending you.
-Thanks for a Great JobEMBALAJE Y CARGA
